Parts description |
Used in practical no |
| Digital / Analogue Multimeter |
1, 4 |
| 5 randomly selected 3 colour ring resistors |
1 |
| Soldering Iron 25W preferred |
2, 3, 3, 4, 5, 6, 7, 9 |
| Several redundant components, piece of PCB |
2 |
| Set of small side cutters |
3, 4, 5, 6, 7, 9 |
| Electronic grade cored solder |
2, 3, 4, 5, 6, 7, 9 |
| 3V "DRY CELLS" battery pack with connecting wire |
3, 4, 5, 6 |
| Small switch |
3, 4, 5, 6 |
| 3v Lamp |
3, 4, 5, 6 |
| Lamp holder suitable for lamp mentioned above |
3, 4, 5, 6 |
| PCB with isolated areas of track click here to see
sample fabricated from a piece of fibre glass PCB |
3, 4, 5, 6 |
| Several pieces of insulated flexible connecting wire |
3, 4, 5 , 6 |
| Power Diode such as a 1N4001 |
5 |
| BC337 NPN transistor |
6 |
| LED |
6 |
| 47R resistor |
6 |
| 1k Resistor |
6 |
| 10k Resistor |
6 |
| PL259 or "N" type or BNC Connector (get 2 and make up a patch lead!!) |
7 |
| General wood working knife |
7 |
| Coaxial cable to fit connector |
7 |
| 13 amp fuse plug |
8 |
| About 0.5m of suitable 3 core electrical flex |
8 |
| Screw driver to suite the plug |
8 |
| Insulation tape to seal off the other end of the 3 core flex isolating
each core. |
8 |
| All the parts needs for an Amateur Radio project |
9 |
|
